4" Lift Kit | 2019-2023 Dodge / Ram 1500 4 Wheel Pickup w/o Air Suspension | 1663H (2023)

• Precio $2,271.33

• Basic game Id 1664FSL

• PASO 2:

• Customize this team!

The 2" BDS performance coilover system not only improves your truck's stance, but also dramatically improves ride quality and off-road capabilities.

Designed to be much more than just a "leveling kit," these new coilover systems take advantage of factory suspension geometry without overstretching running angles and offer the next level of performance in a smaller lift package. The heart of this 2" leveling kit is a pair of specially tuned FOX 2.0 Performance Series coil springs. These non-reservoir coil springs are preset for the correct lift height right out of the box and use a threaded body to allow for adjustment of Direct Bolt-On Replacement of factory shock assemblies and improved shock performance with an extruded and machined 2.0" 6061 T6 aluminum shell for better heat dispersion, along with an Internal Floating Piston (IFP) to eliminate preload. oil vent, FOX proprietary internals, hard chrome 5/8" heat treated alloy axle, all preloaded with coil springs ready for easy installation. This kit takes performance to the next level when upgrading to the Performance Series FOX 2.0. The front end also comes with a pair of Performance Control Arms (UCA) designed to improve suspension strength and travel. Constructed from 1.5" thick wall DOM tubing, these UCAs utilize a cup Indexed ball joint to change the position of the upper ball joints and allow more travel. These arms come fully assembled right out of the box with high quality greasable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance to uniball and heim.

At the rear of these lift systems, the factory coil springs have been retained to achieve a flat position without changing payload/trailer capacity. A pair of FOX Performance Series 2.0 IFP shocks are supplied to match the front end performance.

Enhance the look and capability of your RAM 1500 truck with these new 2" Threaded Leveling Systems from BDS Suspension.

• Tire and wheel combinations
• 295/65r with 20x9 5" rear spacing
• 33x12.50 with 20x9 and 4.5" clearance in back

*Trimming may be required*

• This. Object:3 sata
• Difficulty level (easy 1 - 5 complicated):2
• review completedVehicle equipment informationhere

• Precio $3371.38

• Basic game Id 1664FPE

• PASO 2:

• Customize this team!

The BDS suspension raises the bar for the RAM 1500 with new 2" coilover systems.

Designed to be much more than just a "leveling kit," these new coilover systems take advantage of factory suspension geometry without overstretching running angles and offer the next level of performance in a smaller lift package. At the heart of these 2" systems is a pair of precision-tuned FOX 2.5 Performance Elite Series shocks designed to outperform on and off-road while soaking up the terrain. These shocks are preset for the correct lift height from Right out of the box.Boxed for optimal performance and a direct bolt-on replacement for factory shock assemblies.Features a seamless polished aluminum body with smooth bore for better heat dispersal, hardened carbon steel shaft 7/8" coil springs, Eibach coil springs and black anodized machined 6061-T6 aluminum full mounts with tank removal, optional built-in DSC (dual compression) tuning technology. DSC allows you to easily adjust the compression damping of your vehicle's suspension so you can dial in the ideal driving performance to soak up bumps, big and small. The DSC has 12 adjustment points for high-speed compression, as well as 10 adjustment points for low-speed compression, allowing you to make big or small changes to further enhance your performance. Adjustments can be made by simply turning the knobs at the end of the tank. No tools or shop adjustments are required, allowing you to tune your suspension on the track. A pair of tank mounting brackets are supplied to position the tank. Complementing the coil springs is a pair of high performance Upper Control Arms (UCA) designed to improve suspension travel and strength. Constructed using 1.5" thick wall DOM tubing, these UCAs use an indexed ball joint cup to move the upper links for more travel. These arms come fully assembled right out of the box with high quality ball joints that can be lubricated and rubber bushed for long life, quiet operation and superior corrosion resistance compared to uniballs and heims.

In the rear, these 2" systems retain the stock leaf springs while enhancing the performance of the shocks along with the front end. Your choice of FOX 2.0 Performance Series IFP or FOX 2.5 Performance Elite Series DSC Shock Reservoir gas rear shocks offer upgrades to match the front end for next level performance and easy tuning to meet the demands of the track. As with all BDS kits, these come ready to install right out of the box with all hardware packages and step by step installation instructions.

Upgrade the look and capability of your RAM 1500 truck with this 2" Coilover system from BDS Suspension.

• Tire and wheel combinations
• 295/65r with 20x9 5" rear spacing
• 33x12.50 with 20x9 and 4.5" clearance in back

*Trimming may be required*

See Also
6.5" coilover kit | Chevy / GMC 2020-2023 1 ton 4WD | 753FPE
• This. Object:3 sata
• Difficulty level (easy 1 - 5 complicated):2
• review completedVehicle equipment informationhere

• Precio $2701.39

• Basic game Id 1664F

• PASO 2:

• Customize this team!

The BDS suspension outperforms the RAM 1500 with 2" coilover systems.

Designed to be much more than just a "leveling kit," these new coilover systems take advantage of factory suspension geometry without overstretching running angles and offer the next level of performance in a smaller lift package. The heart of these new 2" systems is a pair of precision-tuned FOX 2.5 factory racing remote reservoir coilovers designed to outperform on and off-road performance while soaking up the terrain. These coilovers are preset for the height of the Correct lift right out of the box.Boxed to ensure optimum performance and direct bolt-on replacements for factory shock assemblies.Features a smooth brushed bore, seamless alloy body, 7/8 carbon hardened steel shaft 8" Eibach coil springs and black anodized machined 6061-T6 aluminum Longitudinal stays with optional DSC integrated adjust technology for reservoir removal (two-speed compression). DSC allows you to easily adjust the compression damping of your vehicle's suspension so you can dial in the ideal driving performance to soak up bumps, big and small. The DSC has 12 adjustment points for high-speed compression, as well as 10 adjustment points for low-speed compression, allowing you to make big or small changes to further enhance your performance. Adjustments can be made by simply turning the knobs at the end of the tank. No tools or shop adjustments are required, allowing you to tune your suspension on the track. A pair of tank mounting brackets are supplied to mount the tank above. Complementing the coil springs is a pair of high performance Upper Control Arms (UCA) designed to improve suspension travel and strength. Constructed using 1.5" thick wall DOM tubing, these UCAs use an indexed ball joint cup to move the upper ball joints for more travel. These arms come fully assembled right out of the box with high quality ball joints that can be lubed and rubber bushings for long life, quiet operation, and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are a pair of IFP FOX 2.0 performance series gas shocks that complement the part front and complete the package.

• Tire and wheel combinations
• Stock to stock and rear space between stocks
• 295/65r with 20x9 5" rear spacing
• 33x12.50 with 20x9 and 4.5" clearance in back

*Trimming may be required*

• This. Object:3 sata
• Difficulty level (easy 1 - 5 complicated):3
• review completedVehicle equipment informationhere

• Precio $3,608.22

• Basic game Id 1709FPE

• PASO 2:

• Customize this team!

BDS suspension raises the bar for the 2019+ RAM 1500 with new 3" spring systems.

Engineered to take advantage of factory suspension geometry without overextending running angles, these 3" systems offer the next level of performance without the need for a suspension overhaul to correct geometry like 4"+ kits. The heart of these 3" systems is a pair of precision-tuned FOX 2.5 Performance Elite Series coil springs designed to outperform on and off-road while soaking up the terrain. These coil springs are preset for the correct lift height. Right out of the box.To provide optimal performance and direct replacement.bolts for factory shock assemblies.Features a seamless polished aluminum body with smooth bore for better heat dispersion, hardened carbon steel shaft 7/8"" Eibach coil springs and black anodized machined 6061-T6 aluminum mounts complete with reservoir removal, optional DSC fit technology installed (dual compression). DSC allows you to easily adjust the compression damping of your vehicle's suspension so you can dial in the ideal driving performance to soak up bumps, big and small. The DSC has 12 adjustment points for high-speed compression, as well as 10 adjustment points for low-speed compression, allowing you to make big or small changes to further enhance your performance. Adjustments can be made by simply turning the knobs at the end of the tank. No tools or shop adjustments are required, allowing you to tune your suspension on the track. A pair of tank mounting brackets are supplied to position the tank. Complementing the coil springs is a pair of high performance Upper Control Arms (UCA) designed to improve suspension travel and strength. Constructed using 1.5" thick wall DOM tubing, these UCAs use an indexed ball joint cup to move the upper links for more travel. These arms come fully assembled right out of the box with high quality ball joints that can be lubricated and rubber bushed for long life, quiet operation and superior corrosion resistance compared to uniballs and heims.

For the rear of these 3" systems, the stance is leveled with a pair of 1.5" dual coil springs engineered for exceptional ride quality and additional payload capacity over stock. Your choice of rear FOX 2.0 Performance Series IFP gas shocks or upgraded FOX 2.5 Performance Elite Series DSC shock reservoirs is offered to match the fronts for the next level of performance and easy adjustability to meet the demands of the trail. Like all BDS kits, these come ready to install right out of the box with all hardware packages and step-by-step installation instructions.

Upgrade the look and capability of your RAM 1500 truck with this 3" Coilover system from BDS Suspension.

• Tire and wheel combinations
• 33x12.50 with 20x9 and 4.5-5" rear clearance
• 33x12.50 with 18x9 and 4.5-5" rear clearance

*Trimming may be required*

• This. Object:4 sata
• Difficulty level (easy 1 - 5 complicated):3
• review completedVehicle equipment informationhere

• Precio $2313.22

• Basic game Id 1663H

• PASO 2:

• Customize this team!

Dodge Ram 1500 4WD Trucks without Air Suspension

Enhance the look and performance of your RAM 1500 4WD truck with the BDS Suspension IFS 4" Lift System. Based on the tried and true high clearance technology that made BDS ideal for RAM suspension lifts, these systems are designed from the ground up for more At the center of this 4" system, BDS uses a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for original equipment lower control arms.With the front skid plate system, heavy-duty products create a rigid subframe while adding protection for vital steering and powertrain components.Instead of ball joints factory steering, a pair of custom designed nodular cast iron replacement ball joints are supplied to maintain proper steering geometry for compatibility with the ESC system. These connect to the factory steering wheel with a pair of heavy duty replacement tie ends included in the kit. The front diff rides with BDS's multi-point shifter mount system to secure the front diff and keep CV-axle angles to a minimum. An aluminum front driveshaft spacer is also supplied along with longer hardware to allow re-installation of the factory driveshaft. The added ride height in this particular kit comes from a set of spacers mounted on top of the steel shocks along with preload spacers to maintain ride quality and handling characteristics. Completing the front of this kit is a pair of extended stainless steel brake lines and lever relocation brackets.

At the rear of this 4" lift system, the factory coil springs have been replaced with dual-rate ProRide coil springs to raise and level the stance. Along with the added ride height, the rear suspension geometry has been corrected. with a relocated control arm bracket, attached rear rail relocation bracket for axle centering, extended camber linkages and bump stop extensions to properly limit travel Gas shocks to offer improved shock performance All kits come with a durable textured black powder coat finish and ship with all hardware packages to complete the installation along with step-by-step installation instructions.

• Tire and wheel combinations
• 35x12.50 with 18x9 and 5" rear clearance
• 35x12.50 with 20x9 and 5" rear clearance
• Stock with 20" clearance and 22" stock and buttstock

*Trimming may be required*

• This. Object:10 satis
• Difficulty level (easy 1 - 5 complicated):4
• review completedVehicle equipment informationhere

• Precio $4,771.12

• Basic game Id 1663FPE

• PASO 2:

• Customize this team!

Take your RAM 1500 to the next level with BDS Suspension's Performance Elite (PE) Coilover Systems.

Founded around the tried and true high-clearance technology that has made BDS the top choice for RAM suspension lifters, these systems are designed from the ground up to get the most out of your RAM. They feature the new FOX 2.5 PE coilovers and DSC tuned shocks to choose from on any terrain.

At the heart of these systems is a pair of aluminum-bodied FOX 2.5 Performance Elite shocks designed to outperform on and off-road while soaking up the terrain. These coil springs are preset for the correct lift height right out of the box to ensure optimum performance and a direct bolt-on replacement for the factory strut assemblies. They feature a seamless brushed smooth aluminum body, 7/8" carbon hardened steel axle, Eibach coil springs and black anodized machined 6061-T6 aluminum mounts along with available remote reservoirs with DSC (dual speed compression). Built-in DSC tuning technology allows you to easily adjust your vehicle's suspension compression damping so you can set the ideal driving performance to soak up bumps, big and small.Allows you to make big or small changes to further enhance your performance.The adjustments can be done with a simple twist of the knobs located on the end of the reservoir.No tools or shop adjustments are required, allowing you to tune the suspension tracks.Complementing the coilovers are a pair of high clearance crossmembers cut with 1/4" thick laser to increase clearance and provide a solid mounting point for the original equipment lower control arms. These, combined with a heavy-duty front skid plate system, create a rigid subframe while adding protection for vital steering and powertrain components. A pair of specially designed replacement ductile iron steering knuckles are supplied in place of the factory steering knuckles to maintain proper steering geometry for ESC system compatibility. These connect to the factory handlebars with a pair of replacement heavy-duty tie rod ends included in the kit. Two linkage options are available for installation on trucks equipped with the standard hub hole, as well as the larger hub hole used on trucks with 22" factory wheels. The front differential is relocated using the bracket system. BDS multi-point relocation kit to provide minimal retained CV axle angles.An aluminum front driveshaft spacer is also supplied along with longer hardware to allow re-installation of the factory driveshaft.Completing the front end of this kit is a pair of extended stainless steel brake lines and lever relocation brackets.

At the rear of this kit, the factory coil springs have been replaced with ProRide coil springs to even out the stance. Along with the added ride height, the rear suspension geometry has been corrected with a control arm relocation bracket, attached rear rail relocation bracket to re-center the axle, extended link arms to correct angle operating range and stop extensions to properly limit travel . At the rear of these systems, a pair of FOX Performance Series 2.0 IFP gas shocks are used to offer better shock performance on rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powder coat and ship with all hardware packages to complete the installation along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty that includes BDS's no-fine-print warranty, ESC system compatibility, and a dealer-adjusted 5-year, 100-mile powertrain warranty. Enhance the look and capability of your RAM 1500 truck with these PE Coilover Suspension Systems from BDS Suspension.

• Tire and wheel combinations
• 35x12.50 with 20x9 and 4.5-5" rear clearance
• 35x12.50 with 18x9 and 4.5-5" rear clearance

*Trimming may be required*

• This. Object:10 satis
• Difficulty level (easy 1 - 5 complicated):3
• review completedVehicle equipment informationhere

• Precio $2415.33

• Basic game Id 1661H

• PASO 2:

• Customize this team!

Dodge Ram 1500 / Rebel 4WD Pickups without Air Suspension

Enhance the look and performance of your RAM 1500 4WD truck with the IFS 6" Lift System with BDS Suspension. Based on the tried and true high clearance technology that made BDS ideal for RAM suspension lifts, these systems are designed from the ground up for more This new 6" lift system maintains comfort on the road while improving off-road capability with 35-37" tire clearance.

At the heart of this 6" system, BDS uses a pair of 1/4" thick laser cut high clearance crossmembers to increase clearance and provide a solid mounting point for the equipment's lower control arms. original. These, combined with a heavy-duty front skid plate system, create a rigid subframe while adding protection for vital steering and powertrain components. A pair of specially designed replacement ductile iron steering knuckles are supplied in place of the factory steering knuckles to maintain proper steering geometry for ESC system compatibility. These connect to the factory handlebars with a pair of replacement heavy-duty tie rod ends included in the kit. The front diff is relocated using BDS's multi-point relocation bracket system to stabilize the front diff and keep CV axle angles to a minimum. An aluminum front driveshaft spacer is also supplied along with longer hardware to allow re-installation of the factory driveshaft. The added ride height in this particular kit comes from a set of spacers mounted on top of the steel shocks along with preload spacers to maintain ride quality and handling characteristics. Completing the front of this kit is a pair of extended stainless steel brake lines and lever relocation brackets.

At the rear of this 6" lift system, the factory coil springs have been replaced with dual-rate ProRide coil springs to raise and level the stance. Along with the added ride height, the rear suspension geometry has been corrected. with a relocated control arm bracket, attached rear rail relocation bracket to center the axle, extended camber linkages and bump stop extensions to properly limit travel Gas-fired shock absorbers to offer improved shock performance All kits come with a durable textured black powder coat finish and ship with all hardware packages to complete the installation along with step-by-step installation instructions.

• Tire and wheel combinations
• 37x12.50 with 18x9 and 4.5-5" rear clearance
• 37x12.50 with 20x9 and 4.5-5" rear clearance

*Trimming may be required*

• This. Object:10 satis
• Difficulty level (easy 1 - 5 complicated):4
• review completedVehicle equipment informationhere

• Precio $4,830.07

• Basic game Id 1661FPE

• PASO 2:

• Customize this team!

Take your RAM 1500 to the next level with BDS Suspension's Performance Elite (PE) Coilover Systems.

Founded around the tried and true high-clearance technology that has made BDS the top choice for RAM suspension lifters, these systems are designed from the ground up to get the most out of your RAM. They feature the new FOX 2.5 PE coilovers and DSC tuned shocks to choose from on any terrain.

At the heart of these systems is a pair of aluminum-bodied FOX 2.5 Performance Elite shocks designed to outperform on and off-road while soaking up the terrain. These coil springs are preset for the correct lift height right out of the box to ensure optimum performance and a direct bolt-on replacement for the factory strut assemblies. They feature a seamless brushed smooth aluminum body, 7/8" carbon hardened steel axle, Eibach coil springs and black anodized machined 6061-T6 aluminum mounts along with available remote reservoirs with DSC (dual speed compression). Built-in DSC tuning technology allows you to easily adjust your vehicle's suspension compression damping so you can set the ideal driving performance to soak up bumps, big and small.Allows you to make big or small changes to further enhance your performance.The adjustments can be done with a simple twist of the knobs located on the end of the reservoir.No tools or shop adjustments are required, allowing you to tune the suspension tracks.Complementing the coilovers are a pair of high clearance crossmembers cut with 1/4" thick laser to increase clearance and provide a solid mounting point for the original equipment lower control arms. These, combined with a heavy-duty front skid plate system, create a rigid subframe while adding protection for vital steering and powertrain components. A pair of specially designed replacement ductile iron steering knuckles are supplied in place of the factory steering knuckles to maintain proper steering geometry for ESC system compatibility. These connect to the factory handlebars with a pair of replacement heavy-duty tie rod ends included in the kit. Two linkage options are available for installation on trucks equipped with a standard hub hole, as well as a larger hub hole used on trucks with 22" factory wheels. The front differential is relocated using the bracket system. BDS multi-point relocation kit to provide minimal retained CV axle angles.An aluminum front driveshaft spacer is also supplied along with longer hardware to allow re-installation of the factory driveshaft.Rounding out the front end of this kit is a pair of stainless steel extended brake lines and lever relocation brackets.

At the rear of this kit, the factory coil springs have been replaced with ProRide coil springs to even out the stance. Along with the added ride height, the rear suspension geometry has been corrected with a control arm relocation bracket, attached rear rail relocation bracket to re-center the axle, extended link arms to correct angle operating range and stop extensions to properly limit travel . At the rear of these systems, a pair of FOX Performance Series 2.0 IFP gas shocks are used to offer better shock performance on rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powder coat and ship with all hardware packages to complete the installation along with step-by-step installation instructions.

Enhance the look and capability of your RAM 1500 truck with these PE Coilover Suspension Systems from BDS Suspension.

• Tire and wheel combinations
• 37x12.50 with 20x9 and 4.5-5" rear clearance
• 37x12.50 with 18x9 and 4.5-5" rear clearance

*Trimming may be required*

• This. Object:12 sati
• Difficulty level (easy 1 - 5 complicated):5
• review completedVehicle equipment informationhere

• Precio $4490.07

• Basic game Id 1661F

• PASO 2:

• Customize this team!

Dodge Ram 1500 / Rebel 4WD Pickups without Air Suspension

Take your RAM 1500 to the next level with BDS Suspension's 6" Coilover Systems. Based on the tried and true high-clearance technology that has made BDS the preferred choice for RAM suspension lifts, these systems are designed from the ground up to Get more out of your RAM Available with a stock tank or with DSC coilover tank customization, these systems offer smooth comfort on the road while delivering impressive off-road performance and capability with a gap between 35-37" tires.

At the heart of these systems is a pair of precision-tuned FOX 2.5 factory racing remote coil tanks designed to outperform on and off-road while soaking up the terrain. These coil springs are preset for the correct lift height right out of the box to ensure optimum performance and a direct bolt-on replacement for the factory strut assemblies. They feature a smooth bore and seamless brushed alloy body, a 7/8" hardened steel carbon axle, Eibach coil springs and black anodized machined 6061-T6 aluminum mounts along with available remote reservoirs with DSC tuning ( Dual Speed ​​Compression) optional installed technology..DSC allows easy adjustment of the vehicle's suspension compression damping so you can set the ideal driving performance to absorb bumps, large and small.DSC has 12 compression adjustment points high-speed as well as 10-point low-speed compression adjustments that allow you to make big or small changes to further enhance your performance.Adjustments can be made with a simple turn of the knobs located on the end of the reservoir. No tools or shop adjustments are required, allowing you to tune the suspension on the track.Complementing the coilovers are a pair of high-spaced, laser-cut crossmembers that are 1/4" thick to increase clearance and provide a solid mounting point for the original equipment lower control arms. These, combined with a heavy-duty front skid plate system, create a rigid subframe while adding protection for vital steering and powertrain components. A pair of specially designed replacement ductile iron steering knuckles are supplied in place of the factory steering knuckles to maintain proper steering geometry for ESC system compatibility. These connect to the factory handlebars with a pair of replacement heavy-duty tie rod ends included in the kit. Two linkage options are available for installation on trucks equipped with a standard hub hole, as well as a larger hub hole used on trucks with 22" factory wheels. The front differential is relocated using the bracket system. BDS multi-point relocation kit to provide minimal retained CV axle angles.An aluminum front driveshaft spacer is also supplied along with longer hardware to allow re-installation of the factory driveshaft.Rounding out the front end of this kit is a pair of stainless steel extended brake lines and lever relocation brackets.

At the rear of this 6" lift system, the factory coil springs were replaced with 5" ProRide coil springs to even out the stance. Along with the added ride height, the rear suspension geometry has been corrected with a control arm relocation bracket, attached rear rail relocation bracket to re-center the axle, extended link arms to correct angle operating range and stop extensions to properly limit travel . At the rear of these systems, a pair of FOX Performance Series 2.0 IFP gas shocks are used to offer better shock performance on rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powder coat and ship with all hardware packages to complete the installation along with step-by-step installation instructions.

• Tire and wheel combinations
• 37" x 12.50" with 18x9 and 4.5-5" rear clearance
• 37" x 12.50" with 20x9 and 4.5-5" back spacing

*Trimming may be required*

• This. Object:12 sati
• Difficulty level (easy 1 - 5 complicated):5
• review completedVehicle equipment informationhere